 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Features PEELTM 16CV8 -25 CMOS Programmable Electrically Erasable Logic Device Multiple Speed, Power Options - Speeds range 25ns - Power as low as 37mA @ 25mHZ Development / Programmer Support - Third party software and programmers - Anachip WinPLACE Development Software - Automatic programmer translation and JEDEC file translation software available for the most popular PAL devices Compatible with Popular 16V8 Devices - 16V8 socket and function compatible - Programs with standard 16V8 JEDEC file - 20-pin DIP, SOIC, TSSOP, and PLCC CMOS Electrically Erasable Technology - Superior factory testing - Reprogrammable in plastic package - Reduces retrofit and development costs Application Versatility - Replaces random logic - Super sets standard 20-pin PLDs (PALs) General Description The PEELTM 16CV8 is a Programmable Electrically Erasable Logic (PEEL) device providing an attractive alternative to ordinary PLDs. The PEELTM 16CV8 offers the performance, flexibility, ease of design and production practicality needed by logic designers today. The PEELTM 16CV8 is available in 20-pin DIP, PLCC, SOIC and TSSOP packages (see Figure 1) with 25ns speed and power consumption as low as 37mA. EE-Reprogrammability provides the convenience of instant reprogramming for development and reusable production inven- tory minimizing the impact of programming changes or errors. EEReprogrammability also improves factory testability, thus assuring the highest quality possible. The PEELTM 16CV8 architecture allows it to replace over standard 20pin PLDs (PAL, GAL, EPLD etc.). See Figure 2. Anachip's PEELTM 16CV8 can be programmed with existing 16CV8 JEDEC file. Some programmers also allow the PEELTM 16CV8 to be programmed directly from PLD 16L8, 16R4, 16R6 and 16R8 JEDEC files. Additional development and programming support for the PEELTM16CV8 is provided by popular third-party programmers and development software. Anachip also offers free WinPLACE development software. Figure 1 - Pin Configuration Figure 2 - Block Diagram This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of this product. No rights under any patent accompany the sale of the product. Rev. 1.0 Dec 16, 2004 1/11 Functional Description The PEELTM 16CV8 implements logic functions as sum-of- products expressions in a programmable-AND/fixed-OR logic array. User-defined functions are created by programming the connections of input signals into the array. User-configurable output structures in the form of macrocells further increase logic flexibility. 64 product terms: -56 product terms (arranged in 8 groups of 7) form sum-of-product functions for macrocell combinatorial or registered logic -8 product terms (arranged 1 per macrocell) add an additional product term for macrocell sum-of-products functions or I/O pin output enable control At each input-line/product-term intersection there is an EEPROM memory cell which determines whether or not there is a logical connection at that intersection. Each product term is essentially a 32-input AND gate. A product term which is connected to both the true and complement of an input signal will always be FALSE and thus will not affect the OR function that it drives. When all the connections on a product term are opened, that term will always be TRUE. When programming the PEELTM 16CV8, the device programmer first performs a bulk erase to remove the previous pattern. The erase cycle opens every logical connection in the array. The device is configured to perform the user-defined function by programming selected connections in the AND array. (Note that PEELTM device programmers automatically program all of the connections on unused product terms so that they will have no effect on the output function. Architecture Overview The PEELTM 16CV8 features ten dedicated input pins and eight I/O pins, which allow a total of up to 16 inputs and 8 outputs for creating logic functions. At the core of the device is a programmable electrically-erasable AND array which drives a fixed OR array. With this structure the PEELTM 16CV8 can implement up to 8 sum-of-products logic expressions. Associated with each of the eight OR functions is a macrocell which can be independently programmed to one of up to four different basic configurations. The programmable macrocells allow each I/O to create sequential or combinatorial logic functions of active-high or active-low polarity, while providing two possible feedback paths into the array. Three different device modes, Simple, Complex, and Registered, support various user configurations. In Simple mode a macrocell can be configured for combinatorial function with the output buffer permanently enabled, or the output buffer can be disabled and the I/O pin used as a dedicated input. In Complex mode a macrocell is configured for combinatorial function with the output buffer enable controlled by a product term. In Registered mode, a macrocell can be configured for registered operation with the register clock and output buffer enable controlled directly from pins, or can be configured for combinatorial function with the output buffer enable controlled by a product term. In most cases the device mode is set automatically by the development software, based on the features specified in the design. The three device modes support designs created explicitly for the PEELTM 16CV8, as well as designs created originally for popular PLD devices such as the 16R4, 16R8, and 16L8. Table 1 shows the device mode used to emulate the various PLDs. Design conversion into the 16CV8 is accommodated by JEDEC-to-JEDEC translators available from Anachip, as well as several programmers which can read the original PLD JEDEC file and automatically program the 16CV8 to perform the same function. The programmable AND array of the PEELTM 16CV8 is formed by input lines intersecting product terms. The input lines and product terms are used as follows: 32 input lines: -16 input lines carry the true and complement of the signals applied to the 8 dedicated input pins -16 additional lines carry the true and complement of 8 macrocell feedback signals or inputs from I/O pins or the clock/ OE pins Table 1 : PEELTM 16CV8 Device Compatibility PLD Architecture PEELTM 16CV8 Compatibility Device Mode 10H8 10L8 10P8 12H6 12L6 12P6 14H4 14L4 14P4 16H2 16HD8 16L2 16LD8 16P2 16H8 16L8 16P8 16R4 16R6 16R8 16RP4 Simple Simple Simple Simple Simple Simple Simple Simple Simple Simple Simple Simple Simple Simple Complex Complex Complex Registered Registered Registered Registered AND/OR Logic Array Anachip Corp. www.anachip.com.tw 2/11 Rev. 1.0 Dec 16, 2004 Table 1 : PEEL TM 16CV8 Device Compatibility Simple Mode In Simple mode, all eight product terms feed the OR array which can generate a purely combinatorial function for the output pin. The programmable output polarity selector allows active-high or active-low logic, eliminating the need for external inverters. For output functions, the buffer can be permanently enabled. Feedback into the array is available on all macrocell I/O pins, except for pins 15 and 16. Figure 6 shows the logic array of the PEELTM 16CV8 configured in Simple mode. Simple mode also provides the option of configuring an I/O pin as a dedicated input. In this case, the output buffer is permanently disabled, and the I/O pin feedback is used to bring the input signal from the pin into the logic array. This option is available for all I/O pins except pins 15 and 16. Figure 3 shows the possible Simple mode macrocell configurations. 1 Simple Mode Active Low Output VCC PLD Architecture Compatibility 16RP6 14RP8 PEELTM 16CV8 Device Mode Registered Registered Programmable Macrocell The macrocell provides complete control over the architecture of each output. The ability to configure each output independently permits users to tailor the configuration of the PEELTM 16CV8 to the precise requirements of their designs. Macrocell Architecture Each macrocell consists of an OR function, a D-type flip-flop, an output polarity selector, and a programmable feedback path. Four EEPROM architecture bits MS0, MS1, OP, and RC control the configuration of each macrocell. Bits MS0 and MS1 are global, and select between Simple, Complex, and Registered mode for the whole device. Bits OP and RC are local for each macrocell; bit OP controls the output polarity and bit RC selects between registered and combinatorial operation and also specifies the feedback path. Table 2 shows the architecture bit settings for each possible configuration. Equivalent circuits for the possible macrocell configurations are illustrated in Figures 3, 4, and 5. When creating a PEELTM device design, the desired macrocell configuration generally is specified explicitly in the design file. When the design is assembled or compiled, the macrocell configuration bits are defined in the last lines of the JEDEC programming file. Table 2 : PEEL TM 16CV8 Device Mode/Macrocell Configuration Bits 2 Simple Mode Active High Output VCC 3 Simple Mode I/O Pin Input Figure 3 - Macrocell Configurations for Simple mode of the PEELTM 16CV8 (see Figure 6 for Logic Array) Anachip Corp. www.anachip.com.tw 3/11 Rev. 1.0 Dec 16, 2004 Complex Mode In Complex mode, seven product terms feed the OR array which can generate a purely combinatorial function for the output pin. The programmable output polarity selector provides active-high or active-low logic, eliminating the need for external inverters. The output buffer is controlled by the eighth product term, allowing the macrocell to be configured for input, output, or bidirectional functions. Feedback into the array for input or bidirectional functions is available on all pins except 12 and 19. Figure 4 shows the possible complex mode macrocell configurations. 1 Registered Mode Active Low Registered Output OE PIN 2 Registered Mode Active High Registered Output OE PIN D Q Q D Q Q CLK PIN CLK PIN 3 Registered Mode Active Low Combinatorial Output 4 Registered Mode Active High Combinatorial Output PRODUCT TERM PRODUCT TERM 2 1 Complex Mode Active Low Output Complex Mode Active High Output PRODUCT TERM PRODUCT TERM Figure 5 - Macrocell Configurations for the Registered Mode of the PEELTM 16CV8 (see Figure 8 for logic Array) Design Security Figure 4 - Macrocell Configurations for the Complex Mode of the PEELTM 16CV8 (see Figure 7 for Logic Array) The PEELTM 16CV8 provides a special EEPROM security bit that prevents unauthorized reading or copying of designs programmed into the device. The security bit is set by the PLD programmer, either at the conclusion of the programming cycle or as a separate step, after the device has been programmed. Once the security bit has been set it is impossible to verify (read) or program the PEELTM until the entire device has first been erased with the bulk-erase function. Registered Mode Registered mode provides eight product terms to the OR array for registered functions. The programmable output polarity selector provides active-high or active-low logic, eliminating the need for external inverters. (Note, however, that if register is selected, the PEELTM 16CV8 reggisters power-up reset and so before the first clock arrives the output at the pin will be low if the user has selected active-high logic and high if the user has selected active-low logic. If combinatorial is selected, the output will be a function of the logic.) For registered functions, the output buffer enable is controlled directly from the /OE control pin. Feedback into the array comes from the macrocell register. In Registered mode, input pins 1 and 11 are permanently allocated as CLK and /OE, respec- tively. Figure 8 shows the logic array of the PEELTM 16CV8 configured in Registered mode. Registered mode also provides the option of configuring a macrocell for combinatorial operation, with seven product terms feeding the OR function. Again the programmable output polarity selector provides active-high or active-low logic. The output buffer enable is controlled by the eighth product term, allowing the macrocell to be configured for input, output, or bidirectional functions. Feedback into the array for input or bidirectional functions is available on all I/O pins. Macrocell Configurations for the Registered Mode of the PEELTM 16CV8 Signature Word The signature word feature allows a 64-bit code to be programmed into the PEELTM 16CV8. The code cannot be read back after the security bit has been set. The signature word can be used to identify the pattern programmed into the device or to record the design revision, etc. Anachip Corp. www.anachip.com.tw 4/11 Rev. 1.0 Dec 16, 2004 1 I 19 I/O MACRO CELL 2 I MACRO CELL I 3 18 I/O MACRO CELL I 17 I/O 4 MACRO CELL I 5 16 I/O MACRO CELL I 15 I/O 6 MACRO CELL I 7 14 I/O MACRO CELL I 8 13 I/O MACRO CELL 9 I 12 I/O 11 Figure 6 - PEEL TM 16CV8 Logic Array - Simple Mode (see Figure 3 for macrocell details) Anachip Corp. www.anachip.com.tw 5/11 Rev. 1.0 Dec 16, 2004 Anachip Corp. www.anachip.com.tw 6/11 Rev. 1.0 Dec 16, 2004 CLK 1 19 I/O MACRO CELL I 2 18 I/O MACRO CELL I 3 17 I/O MACRO CELL I 4 16 I/O MACRO CELL I 5 15 I/O MACRO CELL I 6 14 I/O MACRO CELL I 7 13 I/O MACRO CELL I 8 12 I/O MACRO CELL I 9 11 OE Figure 8 - PEEL TM 16CV8 Logic Array - Registered Mode (see Figure 5 for macrocell details) Anachip Corp. www.anachip.com.tw 7/11 Rev. 1.0 Dec 16, 2004 Absolute Maximum Ratings Symbol VCC VO IO TST TLT Parameter Supply Voltage Voltage Applied to Any Pin2 Output Current Storage Temperature Lead Temperature This device has been designed and tested for the specified operating ranges. Improper operation outside of these levels is not guaranteed. Exposure to absolute maximum ratings may cause permanent damage. Conditions Relative to Ground Relative to Ground1 Per Pin (IOL, IOH) Soldering 10 Seconds Rating -0.5 to +6.0 -0.5 to VCC +0.6 +25 -65 to +150 +300 Unit V V mA o C o C Operating Range Symbol VCC TA TR TF TRVCC Parameter Supply Voltage Ambient Temperature Clock Rise Time Clock Fall Time VCC Rise Time Conditions Commercial Commercial See Note 3. See Note 3. See Note 3. Min 4.75 0 Max 5.25 +70 20 20 250 Unit V C ns ns ms o D.C. Electrical Characteristics Over the operating range (Unless otherwise specified) Symbol VOH VOHC VOL VOLC VIH VIL IIL IIH ICC 10 Parameter Output HIGH Voltage - TTL Output HIGH Voltage - CMOS Output LOW Voltage - TTL Output LOW Voltage - CMOS Input HIGH level Input LOW Voltage Input, I/O Leakage Current LOW Input, I/O Leakage Current HIGH VCC Current, f=1MHz Input Capacitance Output Capacitance Conditions VCC=Min, IOH=-4.0mA VCC=Min, IOH=-10A VCC=Min, IOL=16mA VCC=Min, IOL=10A VCC=Max, VIN=GND, I/O=High Z VCC=Max, VIN=GND, I/O=High Z VIN=0V or VCC, F=25MHz All Outputs disabled4 TA=25oC, VCC=5.0V @f=1MHz Min 2.4 VCC-0.3 2.0 -0.3 Max Unit V V V V V V A A mA pF pF 0.5 0.15 VCC+0.3 0.8 -10 0(Typical) -25 40 37 6 12 CIN7 COUT7 Anachip Corp. www.anachip.com.tw 8/11 Rev. 1.0 Dec 16, 2004 A. C. Electrical Characteristics Symbol tPD tOE tOD tCO1 tCO2 tCF tSC tHC tCL, tCH tCP fMAX1 fMAX2 fMAX3 tAW tAP tAR tRESET Parameter Input5 to non-registered output Input5 to output enable6 Input5 to output disable6 Clock to Output Clock to comb. Output delay Via internal registered feedback Clock to Feedback Input5 or feedback setup to clock Input5 hold after clock Clock low time, clock high time8 Min clock period Ext (tSC + tCO1) Internal feedback (1/tSC +tCF)11 External Feedback (1/tCP)11 No Feedback (1/tCL +tCH)11 Asynchronous Reset Pulse Width 5 Input to Asynchronous Reset Asynchronous Reset recovery time Power-on reset time for registers in clear state Over the Operating Range 8, 11 Min Max 25 25 25 15 35 10 20 0 15 35 28.5 28.5 33.3 25 25 25 5 Unit ns ns ns ns ns ns ns ns ns ns MHz MHz MHz ns ns ns s Switching Waveforms Inputs, I/O, Registered Feedback, Synchronous Preset Clock Asynchronous Reset Registered Outputs Combinatorial Outputs Notes: 1. Minimum DC input is -0.5V, however, inputs may undershoot to -2.0V for periods less than 20 ns. 2. VI and VO are not specified for program/verify operation. 3. Test Points for Clock and VCC in tR and tF are referenced at the 10% and 90% levels. 4. I/O pins are 0V and VCC. 5. "Input" refers to an input pin signal. 6. tOE is measured from input transition to VREF0.1V, TOD is measured from input transi- tion to VOH-0.1V or VOL+0.1V; VREF=VL. 7. Capacitances are tested on a sample basis. 8. Test conditions assume: signal transition times of 3ns or less from the 10% and 90% points, timing reference levels of 1.5V (Unless otherwise specified). 9. Test one output at a time for a duration of less than 1 second. 10. ICC for a typical application: This parameter is tested with the device programmed as an 8-bit Counter. 11. Parameters are not 100% tested. Specifications are based on initial characterization and are tested after any design process modification that might affect operational fre- quency. Anachip Corp. www.anachip.com.tw 9/11 Rev. 1.0 Dec 16, 2004 Ordering Information Part Number PEELTM 16CV8P-25 (L) PEELTM 16CV8J-25 (L) PEELTM 16CV8S-25 (L) PEELTM 16CV8T-25 (L) Speed 25ns 25ns 25ns 25ns Temperature C C C C Package P20 J20 S20 T20 Part Number Device TM Suffix PEEL 16CV8P-25X Lead Free Package P = Plastic 300mil DIP J = Plastic (J) Leaded Chip Carrier (PLCC) S = SOIC T = TSSOP Blank : Normal L : Lead Free Package Speed -25 = 25ns tpd Temperature Range (Blank) = Commercial temperature 0 to 70oC Anachip Corp. www.anachip.com.tw 10/11 Rev. 1.0 Dec 16, 2004 Anachip Corp. Head Office , 2F, No. 24-2, Industry E. Rd. IV, Science-Based Industrial Park, Hsinchu, 300, Taiwan Tel: +886-3-5678234 Fax: +886-3-5678368 Email: sales_usa@anachip.com Website: http://www.anachip.com (c)2004 Anachip Corp. Anachip USA 780 Montague Expressway, #201 San Jose, CA 95131 Tel: (408) 321-9600 Fax: (408) 321-9696 Anachip reserves the right to make changes in specifications at any time and without notice. The information furnished by Anachip in this publication is believed to be accurate and reliable. However, there is no responsibility assumed by Anachip for its use nor for any infringements of patents or other rights of third parties resulting from its use. No license is granted under any patents or patent rights of Anachip. Anachip's products are not authorized for use as critical components in life support devices or systems. Marks bearing (c) or TM are registered trademarks and trademarks of Anachip Corp. Anachip Corp. www.anachip.com.tw 11/11 Rev. 1.0 Dec 16, 2004 |
Price & Availability of PEEL16CV8J
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |